Monday, January 21, 2008

Bleach and Mold: What You Think You Know

Chlorine bleach isn’t the holy “purify all” that we once thought it was. Mothers and housekeepers all across the country the past century have tended to think that if it needs to be cleaned or disinfected, bleach will do the trick. Most people would think that chlorine bleach will kill mold, but new studies prove that this is not the case. It is not effective in killing mold on porous surfaces like walls of a household, ceiling tiles, and etcetera.

Unless the mold is on top of a counter or a sink, the bleach will do next to nothing to eliminate the mold. A recent study paid for by Clorox, the largest manufacturer in the world of chlorine bleach, says that attempting to kill mold with bleach is best done on hard surfaces only. This means that if you find mold growing on your wall, trying to clean it with chlorine bleach is not going to help because the mold is growing not only on the outside of the wall, but also deeper in the wall than the chemical can reach. Chlorine bleach is too diluted and not strong enough to get rid of mold unless it is on a non-porous surface like tile.

Chlorine bleach is also not a registered disinfectant with the EPA that works with killing mold. The EPA puts a registration number indicating that a product kills mold on any product that does, but you will not be able to find this on any chlorine bleach label.

Another thing that some people are unaware of is the dangerous properties that chlorine bleach can have if it is mixed with other cleaning products such as anything containing ammonia or anything that contains acid. The mixing of these products causes toxic gases to be released into the air in your home and this occurs most often when someone is trying to disinfect something in their home or get rid of disease-causing microorganisms like mold. Mold is serious business, but don’t risk your life by mixing household chemicals trying to find a cheap way to kill the mold that exists in your home.

In addition to being ineffective in killing mold, it also tends to damage and discolor some surfaces it is used on such as metal.

Home Moldy Home

If I was building a new home, the last thing that I would want to find out at the last minute is that it has been being built with moldy building materials. This happens a lot more often and is a lot more serious than you might think that it is. Mold is a big problem in homes these days, either due to not paying attention to the condition of your home while you are living in it, due to a natural disaster such as a hurricane, or perhaps the most avoidable reason, it was built into the home that you currently live in.

Mold gets built into brand new homes all the time and it is not only the contractor’s fault, but also the owner’s for not paying attention to the building materials being used at the time. For someone paying to have the home built, what they need to do to help prevent this is to pay attention to what is going on at the building site and to visit it often. The building should be completely covered with a tarp until the walls and roof are totally finished and there is no possibility for rain, snow, or any other kind of precipitation to get into the house.

Before building begins you should inspect all the building materials such as the lumber, sheetrock, insulation, and etcetera that are being used. Inspect them and if you see any signs of mold at all, have them tested with a home test kit and set them aside until you are sure that they are not contaminated.

Something just as important as the other things mentioned here is to make sure your contractor and his or her workers are not storing the building materials directly on the ground. This is just asking for mold to start growing on these and this is completely avoidable by just raising the materials up off the ground. They should come into contact with the soil as little as possible, if at all.

Mold testing during different stages of the home’s development should also take place. The testing should be in the beginning, near the middle, and after the home is completed.

As long as you pay attention to what is going on around the new site of your home while your contractor is working on it, you should be able to almost completely avoid mold being built into your home.

Easy Water Damage Prevention

Whether you’re a home owner or renter, live in a new place or old one, no one ever wants to deal with major water damage. It can be difficult to clean up and costly to repair. Mother nature can always throw some curves that only a good insurance policy can cure, but there are a lot of things you can do to prevent small things from becoming major problems.

A solution to major avoidable water damage in the future can be to make a check list for your home today. Start in the bathrooms. Check the shut off valve under your toilet. Make sure there are no leaks there or any dampness around the base where it sits on the floor. If there is, this could mean the seal inside is leaking and probably needs to be replaced.. It is not really difficult, but it has to be reset on the new seal correctly to prevent new leakage. Check anywhere under the sink for the same kind of leaks. The tub and shower pipes and fixtures should be next. If there are signs of water stains on the walls or floors, the problem should be addressed immediately. Putting off fixing these problems can lead to rotting floors, wall studs and mold in the sheetrock.

Of coarse the kitchen is a source of water problems. The same procedures can be repeated there under the sink. Your refrigerator can leak also. Check underneath for water, bumps in the floor or loose tiles. Check the water supply line if you have an ice and water dispenser on your fridge.

There are other places that are just as important as the kitchen and bathrooms. Hot water heaters are seldom thought of unless you get no hot water when you turn on the spigot. They can leak around the fittings and older ones can rust through the bottom.

The laundry room if you have one has potential too. You can get leaks from the water supply feeding to the washer or from the washer itself. If you have ever had a washing machine flood you never want to have another one!

Last but not least are the outside sources. Your roof should be checked for leaks outside and in your attic. Especially after strong storms and or high winds. Outside water spigots are common leaking things that you should keep an eye on. Checking under the house and any pipes in the basement if you have one, is just good sense. Save time and money down the road by utilizing a good check list for all the water sources in your home.